Table of Contents
Advertisement
Technical Specifications
PR-X System
Maximum Inlet Fluid Pressure
Maximum Working Fluid Pressure
Maximum Air Pressure
Electrical Power
Viscosity Range
Wetted Parts
Shot Size Range
Shot Size Repeatability
Flowrate
Material Ratio
Inlet / Outlet Sizes
Air Inlet size
Fluid Inlet size
Fluid Outlet size
Weight
Supply Pump Feed
Cartridge Feed
Maximum Operating Temperature
UHMWPE Pistons
PEEK Bearings
Notes
All trademarks or registered trademarks are the property of their respective owners.
(1)
All PR-X systems are 1:1 fixed ratio systems. If you want to order other ratio systems (1:1 - 2.4:1), please
contact Graco sales representative for a custom solution.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.
3A7526B
US
1200 psi
1200 psi
100 psi
200 - 240 VAC, 50/60 Hz, 10 A
20 - 1,000,000 cps
303/304 Stainless Steel, Hard Chrome, Ceramic, UHMWPE, NBR, Carbon
Steel, PTFE
0.03 - 50 cc
1 %
0.01 - 25 cc/s (Depend on material viscosity)
(1)
1:1
1/4 in.
1/4 in. npt (f)
7/8-9 bell outlet
35 lb
70 lb
120 °F
300 °F
Technical Specifications
Metric
8.3 MPa, 83 bar
8.3 MPa, 83 bar
0.7 MPa, 7 bar
6 mm
16 kg
32 kg
50 °C
150 °C
91
Advertisement
Table of Contents
