Technical Specifications - Graco D60 Operation

Technical Specifications

Electric Supply System
Maximum air input pressure (supply system)
D60 - 3 in. dual post, 16 gal. (60 L), 5 gal. (20 L), 30
gal. (115 L)
Maximum fluid, air working pressure and weight (dis-
placement pump)
Pump Wetted parts
Air Inlet Sizes
D60 - 3 in. dual post, 16 gal. (60 L), 5 gal. (20 L), 30
gal. (115 L)
Electric Pumps
Maximum continuous cycle rate
(To prevent premature pump wear, do NOT exceed
maximum recommended speed of fluid pump)
Weight
Operating temperature range
Input voltage
Input current
Oil capacity†
Oil specification†
Maximum force
Noise (dBa)
Sound data
† The driver gear-box is shipped from the factory pre-filled with oil. Additional oil must be purchased separately.
3A5379B
US
150 psi
For Check-Mate pump packages, see the Check-Mate Pump
Instructions-Parts manual.
For Check-Mate displacement pumps, see the Check-Mate
Displacement pumps Instructions-Parts manual.
US
33 cycles per minute
115 lb
23° to 120° F
200-240 VAC, single phase, 50/60 Hz
20A maximum
1.5 quarts
Graco part number 16W645
ISO 220 silicone-free synthetic EP gear oil†
4200 lbf
Technical Specifications
Metric
1.0 MPa, 10 bar
3/4 in. npt(f)
Metric
52 kg
-5° to 50° C
1.4 liters
18.7 kN
74 dB
51