Advertisement
Installation and Adjustment
1.
For Ceiling Mount / Wall Mount users: Stick the Template Plate on the position where
you want to attach the camera, drill the four holes on the Template Plate for screwing the
Adapter Plate with the supplied Screws and Anchors.
Drill the hole in the centre of the template plate only if you want to wire the cables
through the wall / ceiling. Insert the supplied four Anchors into the holes.
2.
Remove the Cover Cap, unscrew the four screws using the supplied Hexagon Wrench.
3.
Remove the Adapter Plate from the camera and screw to the wall/ceiling with supplied
Screws, then fasten the camera to the Adapter Plate.
3
Advertisement
