Error Message List - Roland TR-6S Owner's Manual

Error Message List

Display Meaning
The SD card is not
inserted, or is inserted
incompletely.
The SD card was
SDCard
removed after you
NotReady!
selected data that was on
the SD card.
The format of the SD card
is invalid.
Data could not be read
from the SD card.
Read Error!
The file is damaged.
Data could not be
written to the SD card.
Write Error!
The format of the SD card
is invalid.
There is insufficient space
SD Card Full!
on the SD card.
The contents of the
Sys Mem
TR-6S's save area may be
Damaged!
damaged.
An unusually large
amount of MIDI data was
MIDI Buff
received, and could not
Full!
be processed.
The MIDI IN connection
MIDI Offline!
was broken.
The TR-6S was unable
to start up. The program
could not be read
Program
correctly. Alternatively,
Error!
the system update
program may be invalid.
Since the TR-6S is
playing, this operation
Now Playing!
cannot be executed.
Since the TR-6S is
Now
recording, this operation
Recording!
cannot be executed.
The file was not found on
Not Found!
the SD card.
The format of the audio
Not
file is not supported.
Supported!
The audio file exceeds
Too Long
the supported number of
Size!
samples.
There is no free space in
No Space!
the user sample area.
There is no enough free
space to save the user
No Tone!
sample tone settings.
36
Action Display
!!CAUTION!!
Turn off the unit, firmly
BATTERY LOW
insert the SD card, and
then turn on the unit
once again.
Use the TR-6S to format
the SD card .
(p. 7)
Make sure that the SD
card is correctly inserted.
Do not use this file.
Make sure that the SD
card is correctly inserted.
Use the TR-6S to format
the SD card (p. 7).
Delete unneeded data.
Execute the factory
reset operation (p. 33).
If this does not solve
the problem, contact
your dealer or customer
support.
Reduce the amount of
MIDI messages that are
being transmitted.
Check that there is no
problem with the MIDI
cable connected to the
TR-6S's MIDI IN, and that
the MIDI cable was not
disconnected.
Use the correct program
to perform the update
once again. If this does
not solve the problem,
contact your dealer or
customer support.
Stop playback before you
execute the operation.
Stop recording before
you execute the
operation.
Make sure that the file
exists on the SD card.
In order to load the file,
you'll need to convert it
to a supported format.
In order to load the
audio file, you'll need
to shorten it (decrease
the number of samples)
or lower its sampling
frequency.
Delete unneeded user
samples to increase the
amount of free space.
Delete unneeded user
samples to increase the
amount of free space.
Meaning Action
Replace the battery,
The battery has run or use a USB cable to
down. connect the unit to your
computer.