Looping A Specific Step; (Step Loop); Holding The Loop Playback; To Cancel Step Loop Mode - Roland TR-6S Owner's Manual

Looping a Specific Step

While a pattern is playing back, you can make the selected step play
as a loop.
All instruments sounded by the selected step play as a loop.
1
Press the [START/STOP]
2
[STEP LOOP]
Press the
The [STEP LOOP] button lit, and the unit is in step loop mode.
3
[1]–[16]
Press the pad
loop.
The selected step begins looping.
When you take your finger off the pad [1]–[16], you return to
pattern playback.

Holding the Loop Playback

You can make a step's loop playback continue even after you release
your finger.
1
While holding down either the
or one of the instrument select buttons [BD]–[OH],
press a pad [1]–[16].
The loop playback continues even after you release your finger.
2
To cancel looping, press the
one of the pads.

To Cancel Step Loop Mode

Press any one of the [PTN SELECT], [TR-REC], [INST REC], or
[VARIATION] buttons.
22
button to play the pattern.
button.
of the step that you want to
[STEP LOOP]
button
[STEP LOOP] button or

(STEP LOOP)