Initializing, Backing-Up, Restoring; Returning To The Factory Settings; (Factory Reset); Backing Up Data To Sd Card (Backup) - Roland TR-6S Owner's Manual

Initializing, Backing-Up, Restoring

Returning to the Factory Settings

Here's how to return the TR-6S to its factory-set state.
NOTE
Be aware that when you execute FACTORY RESET: ALL, the user
sample tones and user sample data are also erased.
1
Press the [UTILITY] button to make it light.
The UTILITY screen appears.
2
Use the [VALUE] knob to select
Reset "
3
Press the [VALUE] knob.
The target select screen appears.
Target Explanation
Returns all settings including patterns and kits
ALL
to their factory-set state.
Returns only the kit settings to their factory-set
KIT
state.
Returns only the patterns to their factory-set
PTN
state.
MEMO
You can also access the target select screen by holding down the
[CLEAR]
button while you turn on the power.
4
Use the [VALUE] knob to select the target, and press
[VALUE]
the knob.
A confirmation message appears.
5
To execute, use the [VALUE]
and press the [VALUE]
If you decide to cancel, use the [VALUE] knob to select "Cancel, " and
then press the [VALUE] knob.
6
When the display indicates
power " turn the TR-6S's power off and on again.

(FACTORY RESET)

"UTILITY: Factory
knob to select "OK,"
knob.
"Completed Turn off
Backing Up Data to SD Card
* If you want to make a backup, save the data (patterns, kits, system
settings) before you proceed. The backup will not include the pattern or
kit that you're currently editing (shown by an "*" indication) or system
settings that you have not saved.
1
Insert the SD card into the TR-6S.
2
[UTILITY]
Press the button to make it light.
The UTILITY screen appears.
3
Use the [VALUE] knob to select
4
[VALUE]
Press the knob.
The BACKUP:NAME screen appears.
MEMO
If a backup file already exists, the BACKUP:SELECT screen appears.
To overwrite-save, select the existing backup file and press the
[VALUE] knob.
If you select Save As and press the
screen appears.
5
Edit the name if necessary.
Controller Explanation
Change the character.
[VALUE] knob
Moves to the right.
[UTILITY] button
Moves to the left.
[COPY] button
[SHIFT] button
Deletes one character
+ [COPY] button
[SHIFT] button
Inserts one character
+ [UTILITY] button
Switches between uppercase/lowercase/
[SHIFT] button
numerals.
+ [VALUE] knob
6
When you've finished inputting characters, press
[VALUE]
the knob.
A confirmation message appears.
7
To execute, use the [VALUE]
[VALUE]
and press the
If you decide to cancel, use the [VALUE] knob to select "Cancel, " and
then press the [VALUE] knob.
(BACKUP)
"UTILITY: Backup "
[VALUE] knob, the BACKUP:NAME
.
(Erase)
.
(Insert)
knob to select "OK,"
knob.
33