Table of Contents
Advertisement
Editing the Pattern Settings (Pattern Setting)
Deleting a Pattern
1
Press the
[PTN SELECT]
2
[CLEAR]
Hold down the
[1]–[16]
to specify the pattern that you want to
delete.
Clearing a Variation
1
Press the
[VARIATION]
2
Hold down the
[CLEAR]
buttons to select the variation that you want to
clear.
All steps of the specified variation are cleared.
Clearing a Track
1
While holding down the
instrument select button
you want to clear.
All steps of the selected track are cleared.
This affects only the selected variation.
Reloading a Pattern or Kit
During playback or editing, here's how you can reload a pattern (return
it to the saved state).
1
[UTILITY]
Hold down the
controller whose value you want to load.
The screen shows the parameter and its value.
Moving the controller does not change the value.
Shortcut
Explanation
[UTILITY] + [PTN
Load a pattern
SELECT]
When [VARIATION]
Load a variation
is lit, [UTILITY] + Pad
[A]–[H]
Load a track
[UTILITY] + [BD]–[OH]
18
button.
button and use the pads
button.
button and use the
[A]–[H]
[CLEAR]
button, press the
[BD]–[OH]
of the track that
(Reload Function)
button and operate the
Advertisement
Table of Contents
