Searching Directly By Chapter Or Track Number; Switching The Angle; Switching The Audio Tracks - Alpine DVA-7996 Owner's Manual

DVD/Video CD Operation
ENTER
Joystick
0 ~ 9
AUDIO
Searching directly
by chapter or track number
Use this function to easily move to the
beginnings of the chapters or tracks on the disc.
1
Except during the stop mode, input the number
of the chapter or track you want to play using the
number keys ("0" to "9").
(The monitor display when chapter 12 is input.)
2
Press the ENTER button.
Playback starts from the selected chapter or
track.
NOTES
This function cannot be used on discs on which no
chapter numbers are recorded.
If the chapter number is a 3-digit number, playback
starts automatically even if the ENTER button is not
pressed at step 2.
Press the DEL. button to delete the last digit in the
chapter/track number. Press and hold the DEL.
button for at least 2 seconds to clear "Chapter" and
"Track" numbers.
Press the RTN button to cancel the chapter/track
search mode and resume normal playback.
With video discs containing playback control (PBC),
the "searching directly by track number" function is
not available while PBC is ON. Press the MENU
button to turn the PBC function off.
If the chapter/track number is known, you can search
directly using the number keys ("0" to "9") during
playback mode, PRE-STOP mode, etc.
32
-EN

Switching the angle

On DVDs in which scenes have been filmed from
multiple angles, the angle can be switched during
playback.
1
DISP/ During playback, press and hold the ANGLE
TITLE
button.
MENU
The angle switches between the angles recorded
on the disc each time the button is pressed.
NOTES
ANGLE
SUB T.
DVD
Video CD

Switching the audio tracks

DVDs can have up to 8 different audio tracks.
These alternate tracks can be switched during
playback.
1
During playback, press and hold the AUDIO
button.
The sound switches between the alternate audio
tracks recorded on the disc each time the button
is pressed.
NOTES
• Video CDs with multiplex audio
1
During playback, press and hold the AUDIO
button.
The left and right channels will be output as
shown in the figure below, each time the button
is pressed.
Some time may be required for the angle to change.
Depending on the disc, the angle may switch in one
of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still
picture is displayed first, after which the angle
switches.
This operation cannot be performed using the
ANGLE button on the main unit.
The alternate track selected becomes the default
setting every time the power is turned on or the disc
is replaced. If the disc does not include that track, the
disc's default language is selected instead.
Not all discs will allow changing the alternate audio
tracks during playback. In these cases, select audio
tracks from the DVDs menu.
There may be a delay before the selected alternate
track begins to play.
LL RR
DVD
DVD
Video CD
LR