Rear Dvd Function; Remote Control Sensor Selector - Alpine DVA-7996 Owner's Manual

DVD/Video CD Operation
Joystick
ENTER
2
To change the setting ...
Move the Joystick up or down to select the item
you want to set, then move the Joystick left or
right to change the setting.
3
Press the ENTER button. The setting is entered.
NOTES
When PBC is turned on, the setting cannot be
changed. Press the MENU button to turn PBC off.
This operation cannot be performed using the DISP
button on the main unit.
4
Press the DISP button once more to turn the
display off.

Rear DVD function

When the rear DVD function is set to "ON", it is
possible to play different sources in the front and
rear seats of the vehicle. For example, the riders
in the front seat can listen to the radio or another
audio source while a rider in the rear views a
DVD using a separately sold rear monitor and
headphones.
1
To view from the rear monitor, load the DVD or
video CD into the main unit.
2
Press the REAR button to switch the rear DVD
function on and off.
When turned on, the REAR DVD indicator on the
audio display lights.
When turned on:
Simultaneous playback/independent operation
for the front and rear seats is enabled.
The front audio source operations are
performed using the DVA-7996's front panel
switches. The DVD playback operations for the
rear monitor are performed with the remote
control unit.
34
-EN
3
Press the SOURCE button to select the audio
source to be played in the front.
NOTES
This function cannot be set if no DVD or video CD is
SOURCE
loaded.
When the rear DVD function setting is turned on and
REAR
the remote control sensor selector is set to
DISP
"REM.REAR", some remote control operations
(POWER ON/OFF, VOLUME UP/DN, MUTE,
SOURCE, ANGLE UP/DN, A. PROC, BAND)
cannot be performed.
The volume of any add-on displays (rear monitor,
etc.) cannot be adjusted from the DVA-7996.
Adjust the volume on the display itself. In addition,
its sound cannot be muted.
The function for external interruption of the sound of
the rear monitor (from the navigation system, for
example) cannot be used when the rear DVD function
setting is turned on.
When the fader is adjusted while the rear DVD
function setting is turned on, that adjustment value is
stored in the memory. When the rear DVD function is
turned on again, the value stored in the memory is
set (only when our company's external processor is
disconnected.).
If you are listening to the AM radio (near 1540 kHz
or 1640 kHz) while the rear DVD function is set to
ON, noises may be heard from the radio, but this is
not a malfunction.

Remote control sensor selector

Use this selector to select whether to use the
DVA-7996's remote control sensor or the remote
control sensor on the extension unit.
1
Press and hold the REAR button for at least 2
seconds to switch the remote control sensor.
REM.FRONT (to use the DVA-7996's remote
REM.REAR (to use a separately sold remote
control sensor)
control sensor unit or the monitor's
remote control sensor)