Displaying The Title/Text - Alpine DVA-7996 Owner's Manual

Basic Operation
Rotary encoder
BAND
TITLE
DN UP

Displaying the Title/Text

It is possible to display the Disc/Station on the audio
display if the title has been previously inputted. For
details, see "Titling Disc/Stations" (page 15). Text
information, such as the disc name and the track name,
will be displayed if playing a CD text compatible disc. It is
also possible to display the folder name, the file name,
and the ID3 tag, etc. while playing MP3 files.
1
Press the TITLE button.
The mode will change every time the button is
pressed.
About "Title" and "Text"
Title: With this device, it is possible to input the CD/DVD/
Video CD/Station name (refer to page 15). This
inputted name is referred to as a "title."
You cannot input or display titles on MP3 discs.
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as "text."
Radio mode:
FREQUENCY DISPLAY
CLOCK DISPLAY
TITLE DISPLAY
CD mode:
ELAPSED TIME DISPLAY
CLOCK DISPLAY
TEXT DISPLAY (DISC NAME)
TEXT DISPLAY (TRACK NAME)
TITLE DISPLAY
14
-EN
MP3 mode:
DVD/Video CD mode:
1
2
3
4
NOTES
1
1
ELAPSED TIME DISPLAY
CLOCK DISPLAY
FOLDER NAME DISPLAY
FILE NAME DISPLAY
ID3 TAG DISPLAY
FRAME DISPLAY
ELAPSED TIME DISPLAY
CLOCK DISPLAY
TITLE DISPLAY
Displayed during playback of a disc with CD Text.
"NO TEXT" will be displayed when the CD contains
no Text data.
If an MP3 file contains ID3 tag information, all the
ID3 tag information is displayed (e.g., track name,
artist name, and album name). All other tag data is
ignored.
"NO TAG" will be displayed when an MP3 file
contains no ID3 tag information.
The recording sampling rate and bit rate of the MP3
file are displayed.
The playback elapsed time is displayed for video
CD with the PBC function when PBC OFF is set.
Some characters may not be displayed correctly with this
device, depending on the character type.
The CD changer must also be CD Text compatible for the Text
information to be displayed.
When the Scroll Setting (refer to page 17) is set to "SCR
MANUAL", press and hold the TITLE button for at least 3
seconds to scroll the Text information only once (TEXT
DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY
or ID3 TAG DISPLAY mode).
"NO SUPPORT" is displayed when the desired text
information cannot be displayed on this unit.
If the title was not previously input, "NO TITLE" is
displayed.
The operations to display the title/text and to select the title
input operation cannot be performed using the TITLE button
on the remote control unit.
2
3
4