6.
If you need to remove the hinges from the display enclosure:
a.
Remove the six Phillips broadhead M2.5 × 5.0 screws (1) from each hinge.
b.
Remove the two Phillips M2.5 × 5.0 screws (2) from each hinge.
c.
Remove the hinges from the display (3).
The display hinges are available as spare part number M45772-001.
7.
If you need to remove the camera module:
a.
Disconnect the cable from the reverse ZIF connector on the module (1).
b.
Lift up evenly across the module and peel the module up from the display back cover (2).
52
Chapter 5 Removal and replacement procedures for authorized service provider parts