To Two Or More Adats - Alesis 2 Reference Manual

The fiber optic cables that make up the digital buss need to be connected in the same
order as the Sync cables. The QuadraVerb 2 is inserted in the fiber optic loop from the
output of the second ADAT to the input of the master ADAT. The QuadraVerb 2 lets
you turn its digital output into a "throughput" of the digital input. This allows you to
move audio through the QuadraVerb 2, even when you don't want to use it to process
anything, without having to repatch your fiber optic cables. More information about
digital audio routing can be found in the next section.
To connect the QuadraVerb 2 to two ADATs:
¿
Connect an EIAJ fiber optic cable (available from your dealer) from the [DIGITAL
OUT] of the QuadraVerb 2 to the [DIGITAL IN] of the first ADAT.
¡
Connect another fiber optic cable from the first ADAT's [DIGITAL OUT] to the
second ADAT's [DIGITAL IN].
¬
Connect another fiber optic cable from the second ADAT's [DIGITAL OUT] to the
QuadraVerb 2's [DIGITAL IN].
÷
Connect a dual male, 9 pin D cable from the first ADAT's [SYNC OUT] to the
second ADAT's [SYNC IN].
ADAT #1
ADAT #2
QuadraVerb 2 Reference Manual
TM
L
INPUT LEVEL OUTPUT
LEFT RIGHT
Digital In
Sync Out
Digital Out
Digital In
Sync In
Digital Out
Alesis Optical Interface - Chapter 7
(Optional) Instrument or Mixer Output
Right Input
VALUE/ENTER
DUAL CHANNEL OCTAL PROCESSING™ MASTER EFFECTS W/DIGITAL I/O
CLIP
-3dB
-12dB
-32dB
INPUT R
Optical Output
BLOCK POWER
PROGRAM COMPARE BLOCK TYPE ROUTING P ARAMETER MIX
1 2 3 4 5
PRESET
STORE BYPASS PAGE GLOBAL NAME MIDI MODULATION
6 7 8 9 0
USER
Optical Input
89