Alesis 2 Reference Manual page 12

Simultaneous effects processor

Hide thumbs Also See for 2:

Most Preset Programs route the LR IN signal to the LR OUT.When connecting to a

mixer's aux sends and returns. the Global Direct Signal Mute should be set to ON.

To remove all direct routings of inputs to outputs on all Programs simultaneously:

Press [GLOBAL].

The [GLOBAL] LED will be lit.

Press [< PAGE] once.

This selects Global Page 9. The display will read:

GLOBAL DIRECT SIGNAL MUTE:

OFF

Turn the [VALUE/ENTER] knob to the right until the display reads "ON."

The next Program recalled which has the inputs routed to the outputs will not

display the patch cords for these connections nor will you hear any direct

uneffected signal at the outputs.

QuadraVerb 2 Reference Manual

Setting Up - Chapter 1

Table of Contents

Quadraverb2