Checking The Software Version; Re-Initializing; Total Reset; Maintenance/Service - Alesis 2 Reference Manual

Checking the Software Version

The current software version may be determined by holding [GLOBAL] and pressing
[PROGRAM]. The display will indicate the currently installed software version.

Re-initializing

To re-initialize the QuadraVerb 2, hold down both [PROGRAM] and [COMPARE]
while turning on the power. This will reset all Global parameters to their default
settings, and will initialize the edit buffer so that the current Program is set to its
default settings (no Blocks/routings). However, none of the Programs in the User
bank or the Preset bank are changed when re-initializing the unit this way.

Total Reset

A more drastic version of re-initializing the QuadraVerb 2 will erase all User Programs,
as well as resetting all Global parameters. Hold down [PROGRAM], [COMPARE], and
[<BLOCK] simultaneously while turning on the power.

Maintenance/Service

Cleaning

Disconnect the AC cord, then use a damp cloth to clean the QuadraVerb 2's metal
and plastic surfaces. For heavy dirt, use a non-abrasive household cleaner such as
Formula 409 or Fantastik. DO NOT SPRAY THE CLEANER DIRECTLY ONTO THE
FRONT OF THE UNIT AS IT MAY DESTROY THE LUBRICANTS USED IN THE
SWITCHES AND CONTROLS! Spray onto a cloth, then use cloth to clean the unit.

Warranty Information

This product is warrantied by Alesis to the original purchaser against defects in
material and workmanship for a period of 1 year for parts and 90 days for labor from the
date of purchase. Complete terms of the Limited Warranty are stated on the Warranty
Card packed with the product. Please retain a copy of your dated sales receipt for
proof of warranty status should repairs be necessary. The warranty is valid in the
country of purchase only.

Refer All Servicing to Alesis

We believe that the QuadraVerb 2 is one of the most reliable multi-effects processors
that can be made using current technology, and should provide years of trouble-free
use. However, should problems occur, DO NOT attempt to service the unit yourself.
High voltage/high current DC voltages are present at several points within the
chassis. Service on this product should be performed only by qualified technicians.
NO USER-SERVICEABLE PARTS INSIDE.
Obtaining Repair Service
Before contacting Alesis, check over all your connections, and make sure you've read
the manual.
Customers in the USA: If the problem persists, call Alesis USA at 1-800-5-
ALESIS and request the Product Support department. Talk the problem over with
one of our technicians; if necessary, you will be given a return authorization (RA)
number and instructions on how to return the unit. All units must be shipped prepaid
and COD shipments will not be accepted.
QuadraVerb 2 Reference Manual
Trouble-Shooting
97