How To Do Maintenance On Pulleys And Belts; Figure 13 A Tension Mechanism That Will Not Change The Angle Of The Pulleys; Figure 14 Some Pairs Of Tension Mechanisms That Can Change The Angle Of The; Table 17 Typical Tools For Pulley And Belt Maintenance - Milnor 72044SR2 Mechanical Parts And Service

Drive Assemblies
Figure 13. A Tension Mechanism that will not Change the Angle of the Pulleys
Figure 14. Some Pairs of Tension Mechanisms that Can Change the Angle of the Pulleys

How to Do Maintenance on Pulleys and Belts

Table 17. Typical Tools for Pulley and Belt Maintenance
Tool
Torque wrench Make the bushing bolts the same
torque to get the minimum axial
run-out.
Laser, straight Align pulleys
edge, or string
Bubble level Align shafts
Dial indicator Measure run-out
Sheave (pulley) Examine pulley wear
gage
Infrared Examine belt temperature
thermometer
34
Function
BNUUUM02.C10 0000274653 A.4 A.3 3/6/20 4:49 PM Released
Related Data
Figure 11 , item 2
Tools are listed in order of preference.
Section and Figure 15
Section and Figure 16
Section and Figure 17
Figure 8 . A source for this tool is www.
maskapulleys.com.
Section . A source for this tool is
http://www.infraredthermome-
tersale.com.
Pellerin Milnor Corporation