B Load Setup From Tape - Alesis BRC Reference Manual

display to look like this:

5.2B Load Setup From Tape

The LOAD SETUP FROM TAPE button is used to load the TOC (table
of contents) from tape into the BRC's internal memory. Information
is loaded from the first ADAT in the system only. When the LOAD
SETUP FROM TAPE button is pressed, the display will read:
Load from tape?
Pressing PLAY will initiate the operation. The tape in the first ADAT
will be rewound to the leader portion and engage playback (this is the
pre-audio section of the tape, so you won't hear any audio). The Tape
Position Counter will display "LOAd" and the LCD display will reflect
the status of the load operation:
Rewinding first
Loading data from
When the load operation is completed, the display will read the
following until you select another BRC function:
Load from tape
• While the BRC is loading from tape, you can manually abort the
process at any time by pressing STOP. Doing so will cause the
display to look like this:
Load aborted. No
setup on tape
• If the BRC doesn't find setup information on tape #1, the
operation will be aborted and the display will read the following:
Tape save
Aborted
(Press PLAY)
tape to start
first tape
Completed
Tape load
Aborted
80