Alesis BRC Reference Manual page 86

in the same song number location that the data originated from. For
example, if you send song #3 out as a system-exclusive dump, when
you receive it back into the BRC it will be placed into song location 3.
To initiate a system-exclusive data dump:
1. Press the MIDI/UTIL button twice (if one of the MIDI/UTIL pages
was already being displayed, press the MIDI/UTIL button
repeatedly until the Dump Sysex function is reached);
The display should look like this:
2: Dump A llData?
(PLAY)
2. Use the UP/DOWN buttons to select song 1–20, or ALL;
Selecting ALL will cause all data to be output at the MIDI Out port
when the PLAY button is pressed. Selecting a number from 1–20 will
cause the same song number's data to be output.
Note: Since all tempo map information is stored together in memory,
tempo map information is not sent out when dumping a single
song.
3. Press the PLAY button to initiate the system-exclusive dump;
When sending all data, the display will temporarily read the
following message:
Sending Bulk Dmp
out MIDI
When sending a single song, the display will temporarily read the
following message:
Sending Song X X
out MIDI
...where XX is the song number (1–20) that was previously selected.
When the data dump is complete, the display will briefly display the
following before returning to the "Dump Sysex" page:
Sysex dump
Completed
82