E Delete Song - Alesis BRC Reference Manual

• When a song is copied, you are taken to the new song location
that you copied to. So, if you selected song 1 and copied it to song
2, you would now be in song 2.
The destination song's new locate points are equal to the original
song's locate points, but offset by the difference in song start points
(the offset is equal to the new song's start point minus the original
song's start point). However, you must set the destination song's start
location first before copying the information from the source song for
this to occur. Changing a song's start position will have no affect on
its locate point positions. All other song information (Tempo Map,
Track Offsets, etc.) will also be copied. When the operation is
complete the display will show the following before returning to the
song page:
Copy

4.6E Delete Song

The DELETE SONG button is used to clear out a song's stored
information (e.g. all of its associated locates, track groups, etc.) and
reset its start position and SMPTE start offset.
To delete a song:
1. Press the DELETE SONG button;
The display will read:
Delete Song X X?
(Press RECORD)
...where XX is the song number (range: 01 through highest existing
song number; max. 20). This number will default to the currently
selected song.
2. Use the Numeric Keypad and UP/DOWN buttons to scroll
through the song numbers. The default number will be the
currently selected song.
3. Press RECORD to delete the song from memory.
The display will temporarily show:
Complete
Song Deleted
62