Quick Start Guide; If You Can't Wait To Get Started - Alesis ADAT-HD24 Reference Manual

If you can't wait to get started:

If you're experienced with multitrack recording, this
chapter is a "shorthand" guide for those who want
to start using the HD24 right away. The basic
hookup and operation of the Alesis ADAT HD24™
is similar to that of previous ADATs in most
respects. If you have questions about any of the
features, don't worry – later chapters will unveil the
mysteries of the HD24's unique and special features.
✪
If you're new to multitrack recording, start
with the more detailed instructions for
hookup and operation starting in the next
chapter.
ADAT HD24 Reference Manual
Step 1: Hook it up to a mixer
1. Pull the ADAT HD24 out of the package.
2. Make sure the
POWER
HD24 is OFF, and plug it into a grounded AC
power source with the supplied power cable.
2. Connect the outputs of a mixer to the
the back of the ADAT HD24.
3. Connect the
OUTPUTS
LINE IN or TAPE IN jacks of the mixing
console.
If you're using a digital mixer:
Instead of steps 2 and 3 above, use optical
cables to connect the three sets of
inputs and the three sets of outputs to
DIGITAL
the mixer.
You'll need six long optical cables for this.
4. Turn the switch on the back of the HD24
POWER
ON.
Once you have done this, in the future you should
press the
POWER
HD24 to turn it on or off.
For more information on connecting the
HD24, see
switch on the back of the
INPUTS
of the ADAT HD24 to the
ADAT OPTICAL
switch on the front of the
.
on
11