Pitch Control - Alesis ADAT-HD24 Reference Manual

basic recording and playback • chapter 3

Pitch Control

The Pitch function controls the recording speed,
and thus the pitch of the audio recorded on disk,
whenever the CLOCK SOURCE is set to Internal.
The HD24's Pitch control has a range of -300 to
+100 cents when using a sample rate of 48kHz or
96kHz, and a range of -200 to +200 cents when
using 44.1kHz or 88.2kHz.
Use the button to control the amount of pitch
PITCH
change.
To set the Pitch amount:
1. Press the
PITCH
Pitch:+00 0 cents
(+00.0%)
2. Press (L) or
YES
After holding for more than two seconds, the Pitch
amount will start either increasing or decreasing
more rapidly, depending on which button is
pressed.
42
button. The display will read:
(M) to change the pitch.
NO
ADAT HD24 Reference Manual