Alesis ADAT-HD24 Reference Manual page 83

using Ethernet • chapter 9
To set the IP address of a Windows
95/98/ME PC:
1. Click the Start button. Choose Settings, then
Control Panel.
2. Double-click the Network icon. Your Network
window should
Configuration tab.
3. In the Configuration window, select the
TCP/IP protocol line that has been associated
with your network card/adapter. Click the
Properties button. If there is no TCP/IP line
listed, please follow the instructions for
"Installing the TCP/IP Protocol" on the
previous pages.
4. Choose the IP Address tab. Select "Specify an
IP address." For the IP Address use 192.168.1.1.
For Subnet Mask, use 255.255.255.0.
If you've already set up your network, you will
leave these numbers unchanged. Write down the IP
address of your computer; the first three numbers
(and a different last number unique from everything
else on the network) will be entered into a Utility
page of the ADAT HD24.
5. Click OK. Windows may ask for original
Windows installation files. Supply them as
needed. You may have to find your Windows
95/98/ME install CD.
6. Windows will ask you to restart the PC. Click
Yes.
When the connection is properly made and
the computer and HD24 are powered up, a
green LED should light next to the
jack on the HD24's rear panel. Once data is
being transferred, a yellow LED will flash
there as well.
82
pop up. Select the
ETHERNET
ADAT HD24 Reference Manual