Adjusting The Edit Start And Edit End Points - Alesis ADAT-HD24 Reference Manual

Adjusting the Edit Start and Edit
End Points
Edit Start and Edit End points can be adjusted in
two ways: by using the cursor keys or by using the
scrub feature.
Adjusting Edit Start and Edit End
points using the Cursor Keys
When the Edit Start or Edit End point is shown in
the display, you can edit their location with the
cursor buttons. This gives you exact control over
their location, accurate to .0003 seconds. To adjust
the Edit Start location:
1. Press the
EDIT START
look like something like this:
L2 3 : "Edit In "
00:00:52:17.54
This example display shows that the Edit Start point
(Locate Point #23) occurs at 0 hours, 0 minutes, 52
seconds, 17 frames and 54 subframes into the song.
Note that the Location point (#23) is currently
selected.
>
2. Press the
(CURSOR RIGHT)
select the Hours field of the Edit Start point.
3. Since we're probably not that far off on our edit,
>
press the
(CURSOR RIGHT)
the Minutes field, Seconds field, Frames field
and Subframes field.
4. When you've selected the field you wish to edit,
press the (L) or
YES
the value.
5. When you're finished, press the
button to hear the new Edit Start location.
You can use this same procedure to adjust and
preview the Edit End location.
ADAT HD24 Reference Manual
button. The display should
button. This will
button to move to
(M) buttons to adjust
N O
EDIT START
Adjusting Edit Start and Edit End
points using Audio Scrub
The HD24 allows you to scrub the audio to find the
optimum Start or End point for your edit.
1. Press and hold
STOP
2. Press and hold the
forward in time.
3. Press and hold the
backwards in time.
4. When you have scrubbed to the location where
you want an edit to begin, release all of the
keys.
5. Hold and press
SET LOCATE
to set a new location for these points.
END
Note that only the tracks that are currently in Track
Edit mode will be heard during the scrub. If no
tracks are selected, all of the tracks will scrub.
chapter 6 • editing
.
button to scrub
F F W D
button to move
R E W
or
EDIT START EDIT
57