Fujitsu PRIMEQUEST 480 Installation Planning Manual page 58

CHAPTER 2 Connection Reference
2.2.3 Notes on cabling PRIMEQUEST 480/440
When determining the total length of the cable to be connected to the PRIMEQUEST
480/440, allow for an extra length of cable for pulling out the units.
Use a sheathless optical cable for the fibre channel cable. (If the sheath fibre
channel cable has been laid, connect a sheathless optical fibre channel cable
with an adapter to the sheath fibre channel cable.)
Avoid laying the power cable close to metal cables such as RS232C or SCSI
cables. If cables need to be crossed, avoid laying the sheathless optical cable
under power cables or metal cables.
2-10 C122-H001-02EN