Fujitsu PRIMEQUEST 480 Installation Planning Manual page 37

Hide thumbs Also See for PRIMEQUEST 480:
Table of Contents

Advertisement

1.6
Floor Plan of Openings in Floor and Template
This section provides the floor plan for openings in the floor. Templates are provided
in section 1.6.2, "Templates," to allow you to plan your configuration before moving
equipment.
• Floor plan for openings in the floor
The floor plan for openings in a free-access floor corresponds to the bottom of the
unit. Because this plan shows the dimensions of the openings in units of 50 mm, the
shapes and locations of cable and ventilation openings in the figure may not match
exactly with the bottom of the unit.
There are the following two types of openings in the free-access floor:
Interface cable opening
Under-floor opening
• Template
The templates for floor connections use a scale of one to fifty (1:50). These templates
can be used to create an equipment layout.
C122-H001-02EN
1.6 Floor Plan of Openings in Floor and Template
1-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 440

Table of Contents