7-4
7.4
Erase a Single Key
1. Press the menu button labeled ERAS. Alternatively, press and hold the menu button labeled
SEC until a tone sounds. Then press ERAS on the second menu that is displayed. If ERAS or
SEC is not on the current menu, use the NAV key to scroll through the available menus.
The last selected key is displayed.
2. Use the NAV key to scroll through the encryption keys until the key to be erased is displayed.
Alternatively, if a keypad microphone is used, press the numeric keys to jump to the desired
encryption key.
ERASED alternates with the key name if the displayed key is blank.
3. Press the menu button labeled SNGL to erase the selected key.
ERASE SNGL KEY followed by the key name is displayed.
4. Press the menu button labeled YES.
The selected key is set to zero.
ERASED is alternately displayed with the key name confirming the erasure.
5. To exit the menu without erasing a key, press the menu button labeled ABRT, the PTT button,
or the home button.
7.5
Erase All Keys
1. Press the menu button labeled ERAS. Alternatively, press and hold the menu button labeled
SEC until a tone sounds. Then press ERAS on the second menu that is displayed. If ERAS or
SEC is not on the current menu, use the NAV key to scroll through the available menus.
The last selected key is displayed.
2. Press the menu button labeled ALL.
ERASE ALL KEYS is displayed.
3. Press the menu button labeled YES. All keys are erased.
ERASED is alternately displayed with the displayed key name confirming the erasure.
4. To exit the menu without erasing the keys, press the menu button labeled ABRT, the PTT
button, or the home button.
October 30, 2006
Encryption: Erase a Single Key
6871769L01-A