Table 9-10. Power-Up Error Codes - Motorola ASTRO XTL 5000 Basic Service Manual

Digital mobile radio hf/uhf range 1/uhf range 2/ 700–800 mhz
Hide thumbs Also See for ASTRO XTL 5000:
Table of Contents

Advertisement

9-16
9.6
Power-Up Error Codes
When the radio is turned on (power-up), the radio performs cursory tests to determine if its basic
electronics and software are in working order. Problems detected during these tests are presented
as error codes on the radio's display. The presence of an error should prompt the user that a
problem exists and that a service technician should be contacted.
Self-test errors are classified as either fatal or non-fatal. Fatal errors inhibit user operation; non-fatal
errors do not. Use the following tables to aid in understanding particular power-up error code
displays.
Error Code
ERROR 01/02
ERROR 01/12
ERROR 01/22
FAIL 01/81
FAIL 01/82
FAIL 01/88
FAIL 01/90
FAIL 01/92
FAIL 01/93
FAIL 01/98
FAIL 01/A2
FAIL 02/81
FAIL 02/88
FAIL 02/90
ERROR 05/10
FAIL 05/81
ERROR 06/10
FAIL 06/81
ERROR 08/10
FAIL 08/81
October 30, 2006

Table 9-10. Power-Up Error Codes

Description
FLASH ROM Codeplug
Checksum
Security Partition
Checksum
Tuning Codeplug
Checksum
FLASH ROM Checksum
FLASH ROM Codeplug
Checksum
External SRAM Failure
General Hardware
Security Partition
Checksum
FlashPORT AUTHENT
CODE Failure
Internal RAM Failure
Tuning Codeplug
Checksum
DSP ROM Checksum
DSP RAM Fatal Error
General DSP Hardware
Failure
Control Head Hardware
Error
Control Head ROM
Checksum Error
Aux Control Head
Hardware Error
Aux Control Head ROM
Checksum Error
Siren Hardware Error
Siren ROM Checksum
Error
Basic Troubleshooting: Power-Up Error Codes
Error Type
Corrective Action
NON-FATAL
Reprogram the codeplug.
NON-FATAL
Reprogram the security partition.
NON-FATAL
Reprogram the tuning partition.
FATAL
Reprogram the radio firmware.
FATAL
Reprogram the codeplug.
FATAL
Turn the radio off, then on.
FATAL
Turn the radio off, then on.
FATAL
Reprogram the security partition.
FATAL
Contact the depot.
FATAL
Turn the radio off, then on.
FATAL
Reprogram the tuning partition.
FATAL
Reprogram the DSP firmware.
FATAL
Turn the radio off, then on.
FATAL
Turn the radio off, then on.
NON-FATAL
Turn the radio off, then on.
FATAL
Replace the control head.
NON-FATAL
Turn the radio off, then on.
FATAL
Replace the aux. control head.
NON-FATAL
Turn the radio off, then on.
FATAL
Replace the siren.
6871769L01-A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Astro xtl 5000 o3 vhf 10-50 wattAstro xtl 5000 o3 vhf 100 wattAstro xtl 5000 o3 uhf range 1 10-40 wattAstro xtl 5000 o3 uhf range 1 100 wattAstro xtl 5000 o3 uhf range 2 10-40 wattAstro xtl 5000 o3 700-800 mhz 10-35 watt ... Show all

Table of Contents