Disassembly/Reassembly Procedures: Replacement Procedures
!
C a u t i o n
7. For secure option-equipped radios, do the following prior to disassembly of the transceiver:
a. Remove the two screws holding the secure (UCM) shield in place.
b. Pull the UCM shield away from the assembly and remove it.
c. Insert a flat-blade screwdriver into the space in the upper-left corner of the secure pocket,
and gently pry the secure interface board (universal encryption module) away from the
chassis.
Screwdriver
Screws
6871769L01-A
The following steps MUST be performed for secure-equipped
radios, prior to removal of the Main Board from the chassis.
Otherwise damage to the transceiver Main Board could occur.
Flat
Blade
Universal
Encryption
Secure
Module
Shield
Figure 8-29. Removing the Secure Interface Board
MAEPF-28222-O
8-21
October 30, 2006