Figure 6-9 Main Options In The Web-Management System Window; Figure 6-10 Ont Status Window - Alcatel-Lucent 7330 Product Information Manual

This section shows you how to retrieve ONT states to check the status of an ONT.
Prerequisites
The prerequisites are:
•
The user access level of the ONT is read-write.
•
The ONT is connected to the PON, and is ranged.
•
The steps to access the interface are completed.
Procedures using HTTP interface
The following procedure provides the steps to check ONT status using the HTTP
interface.
Procedure 6-13 To check ONT status
1
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
•
See Procedure 6-1 for HTTP interface using the first Ethernet port.
•
See Procedure 6-4 for CLI interface using the first Ethernet port.
From the Web-Management System window, click on the States Management
tab, as shown in Figure 6-9.

Figure 6-9 Main options in the Web-Management System window

The ONT status window opens with the ONT states and their current status, as
shown in Figure 6-10.

Figure 6-10 ONT status window

where
ONT state is a mnemonic that represents a possible condition on the ONT; see Table
alphabetical listing and description of the ONT states
Status is the operational state of the condition, where a red button means that the condition is
present, that is active, on the ONT, and a green button means that the condition is not present,
that is inactive, on the ONT
Edition 01 ONT Product Information Guide
6 — ONT management using an ONT interface
March 2011
6-6 for an
6-25