Table 3-9 Rf Video Interface Specifications For Onts With 18 Dbmv Receivers - Alcatel-Lucent 7330 Product Information Manual

3 — ONT and MDU general and interface technical specifications
18 dBmV RF video receivers
Table
receiver. The following ONTs support +18 dBmV receivers:
•
I-011G-P
•
I-241G series ONTs
•
I-241W-P ONTs

Table 3-9 RF video interface specifications for ONTs with 18 dBmV receivers

RF video features
RF output level
RF slope correction (tilt)
Optical power range
CNR
CSO/CTB
MER
QAM signal-to-noise ratio
Measurement assumptions
Channel load
Digital backoff QAM-256
Digital backoff QAM-64
PON input CNR
Note
(1) It is the responsibility of the customer installation crew to ensure proper on-site layout of video distribution by verifying
that the output power at the end devices, such as the TV, VCR, and STB, is between 0 to 18 dBmV.
3.8 SWRD interface specifications
The SWRD meets the following compliance and safety standards:
•
UL safety (UL 60950-1)
•
EU safety (IEC/EN 60950-1)
•
IP rating NEMA 4 (IP 56)
•
EMC emissions (U.S. and Canada) FCC part 15, class B
•
EMC emissions (Europe) EN 55022 and 55024
The power specifications of the SWRD are as follows:
•
input voltage range 12 +-2.0 V dc
•
input current of 0.25 A
3-18
3-9 lists RF video interface specifications for ONTs with an 18 dBvM
Channel mix 80 analog/33
digital (1)
+18 dBmV @ 450 MHz using
a per analog channel
measurement
2 dB from 50 to 870 MHz
+1 to -6 dB
45 dB
53 dB
32 dB
40 dB
80 analog and 33 digital
6 dB
10 dB
52 dB
March 2011
ONT Product Information Guide Edition 01
Channel mix 40 analog/63
digital
+18 dBmV @ 450 MHz using
a per analog channel
measurement
2 dB from 50 to 870 MHz
+2 to -7 dB
46 dB
55 dB
32 dB
40 dB
40 analog and 63 digital
6 dB
10 dB
52 dB
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
Channel mix 0 analog/135
digital
+12 dBmV @ 450 MHz using
a per digital channel
measurement
2 dB from 88 to 870 MHz
+1 to -9 dB
—
—
32 dB
40 dB
0 analog and 135 digital
6 dB
10 dB
52 dB
3FE 54199 AAAA TCZZA