Table 2-3 Naming Designation For Onts - Alcatel-Lucent 7330 Product Information Manual

2 — Part numbers, ordering, and deployment configuration overview
The system supports verification and query functions for each service provided from
end to end. These functions include reporting of the required system or board status
fields to help isolate problems and identify the source of the problems. The functions
require sufficient monitor points in the system to partition the system to effectively
troubleshoot system-level problems.
Requirement for spares
Spare ONTs should be ordered to support normal maintenance activities associated
with the system. ONTs do not have field replaceable parts except battery supplies for
UPSs. Replacement of the ONT is the recommended maintenance activity. ONTs
removed should be reconditioned according to local practice, including all
recommended actions by Alcatel-Lucent.
Training
Training is available at all levels for the operation, maintenance, and administration
of the system. Contact your account representative to obtain the current version of
the customer training catalog.
Documentation
Alcatel-Lucent provides a comprehensive set of documents to facilitate the
installation, administration, operation, installation, and replacement of ONT
equipment. See the appropriate ONT Customer Release Notes or OLT Customer
Release Notes for the user documentation releases and part numbers.
2.7 ONT product identification
In a product series, each ONT or MDU is identified by a designation that defines its
interface characteristics, such as the number of voice, data, and video ports.
Table
Position in mnemonic
Beginning character
First digit after the dash
Second digit after the dash
Third digit after the dash
Character after the third
digit
(1 of 2)
2-22
2-3 describes the naming designation for ONTs.

Table 2-3 Naming designation for ONTs

Description
The series that the product belongs to
The number of POTS interfaces
The number of data interfaces
The number of video interfaces
The type of data service supported. The codes for the supported types
are:
•
E for 10/100BASE-T Ethernet
•
G for 10/100/1000Base-T Ethernet
•
H for HPNA (IP over coaxial cable)
•
M for MoCA and 10/100/1000Base-T Ethernet
•
V for VDSL
•
W for Wi-Fi service
March 2011
ONT Product Information Guide Edition 01
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA