Starting Up The Interlockconfigtool - Mitsubishi Electric EB-50GU-A Operation Manuals

5.2 Starting Up the InterlockConfigTool

[Operating Procedures]
(1) If using USB memory with the EB-50's Initial Settings data, before launching the InterlockConfigTool,
insert the USB memory into the USB port on the computer.
Note
・Back up the data on the USB memory drive on to a computer before using the InterlockConfigTool.
(2) From the Desktop or Start menu,
click the InterlockConfigToolEB50 icon
program.
From the "File" menu in the menu bar, select "Import."
Select "SettingDat.dat" on the HDD or USB, and then
click "Open."
Important
・Do not import the data exported from the Design Tool
into the InterlockConfigTool.
(3) A progress bar will appear to indicate the progress of data
transfer. Upon completion of Initial Settings data transfer, the
Interlock control list will appear.
to launch the
13
Data Import