5.3 Operating Instructions for the Interlock Control List
The current interlock settings can be verified on the Interlock control list. By selecting a specific row, its
detailed settings can be viewed and/or changed, using the menu bar at the left top or the buttons on the right
side of the screen. To verify or change the settings, click the desired row. Refer to section 5.3.1
"Interlock control list" for further details.
Currently
Selected Row
Enable/Disable
Button
Note
・Up to four names of the Input units and Output units will be displayed on the Interlock control list.
If five or more pieces of equipments are registered, the number of equipments will appear,
instead of their individual names (e.g., "Group (5)" or "Address (8)"). In that case, the names of
the equipments can be viewed on the Confirmation screen. Refer to section 5.6 "Confirming the
Interlock Settings" for details about the Confirmation screen.
14