Editing The Interlock Settings - Mitsubishi Electric EB-50GU-A Operation Manuals

5.4 Editing the Interlock Settings

The interlock settings for the selected rows can be edited, or a new set of interlock settings can be
created as explained below.
Refer to the section [Operating Procedures 1: Creating new interlock settings] for how to create new
interlock settings.
Refer to the section [Operating Procedures 2: Editing the existing interlock settings] for how to edit the
existing settings.
Refer to section 5.4.1 "List of Interlock Setting Items" for the detailed interlock settings.
Note
・It is recommended that the Interlock settings file be output in the CSV file for later viewing.
[Operating Procedures 1: Creating new interlock settings]
(1) Click "New" on the right side of the Interlock control list or select "New" from the Menu.
(2) A settings configuration window will appear.
Input Category
Input State
Input Unit
Selection Button
(3) Select the "Input Category."
Note
・The "Input State" and the "Input Unit Selection" buttons will be
available for selection when "Input Category" is selected.
Important
・Before changing the Input Category, delete all selected Input
Units.
(4) Select the Input State. The number of items to be set depends on
the Input Category selected. Make the settings for all "Input
States."
Important
・Set the "Input State" conditions appropriate for given types of
equipments. If non-supported functions are assigned, the
equipments may not function properly.
Input Units Output Units
16
Output Unit
Type
Interlock
Operation
Output Unit
Selection Button