Sony HDCU3300 Maintenance Manual page 14

Equipment required
. PLD download tool (Sony part number : J-7120-140-A)
The cable to connect PC to HDCU3300.
. PC
A PC having parallel port.
A PC in which the PLD Download Tool software is
already installed.
For the applicable OS and the operating environment,
refer to "Download Tool Operating Instruction for
Device Programming".
Data writing procedure
Data writing procedure in the PLD (or ROM for PLD) is
outlined below.
For details of data writing procedure, refer to "Download
Tool Operating Instruction for Device Programming",
which is available in the same site where the PLD Down-
load Tool software is available.
Step 1 Prepare the Project file.
n
Download the Project file from the Sony Database
Server.
Step 2 Turn off the power of HDCU3300.
Connect the PC parallel port to the EPR connector
of the target board using the PLD download tool
(cable).
Step 3 Turn on the power of HDCU3300.
Start the PLD Download Tool software and read
the Project file.
Step 4 Program the PLD (or ROM for PLD) with the
PLD Download Tool software.
Step 5 Upon completion of programming, check that
error message is not displayed. Turn off the power
of HDCU3300 and back on.
1-4 (E)
HDCU3300/MM (J,E)