Advertisement
Contents
Replacing the lamp unit...............................................................4
Before replacing the lamp unit.....................................................4
Switching off the projector............................................................4
Replacing the lamp unit...............................................................5
Read this first!
WARNING:
Before replacing the lamp unit, be sure to turn the power off and to dis-
connect the power plug from the wall outlet.
Electric shocks or explosions can result if this is not done.
z
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
z
Do not remove unspecified screws during the lamp unit replacement.
Doing so can cause electric shocks, burns, or injury.
z
Replace the lamp unit after the lamp has cooled (after waiting at least
one hour).
The high temperature inside the cover will cause burns.
z
WARNING:
r Illustrations in this manual
f Pictures shown are illustrations of PT-SLZ71C in this manual, other models have their
own characteristics and may be different from them.
r Term
f In this manual, the supplied "Wireless/wired remote control unit" or "Wireless remote
control unit" in the projector is referred to as "Remote control".
2 - ENGLISH
TURN THE POWER OFF AND DISCONNECT THE
POWER PLUG FROM THE WALL OUTLET BE-
FORE REPLACING THE LAMP UNIT.
Always follow these precautions
Advertisement
