Technical Specifications - VeriFone UX301 Installation Manual

Specifications
Technical
Specifications
Unit Power
Requirements
Temperature •
NOTE
Weight •
This chapter discusses power requirements, dimensions, and other specifications
of the UX301 card reader.
Refer to the following information on the power, weight, temperature, memory,
ports and other technical details about your UX301 card reader.
•
Operation voltage: 9 to 43 V DC, 24 V DC for printer use
•
Idle Power: 2 W
•
Typical Power: 3 W (CTLS read), 10 W (RS232-V out), 4W (UX100 display
heater), 0.5W (UX100/110), 2.5W(USB-Master), 70 W (printer)
•
Sleep Mode: 15 mW@12 V with CTLS wakeup, 2.5 mW@12 V without CTLS
wakeup
Operating temperature:
•
-30 °C to 70 °C (-22 °F to 158 °F) Standard unit
•
Storage temperature: -30 °C to 80 °C (-22 °F to 176 °F)
•
Power Supply rated for indoor use only: 12 V DC 3.3 A
•
Power Supply rated for outdoor use: 24 V, DC 3.75 A up to 40 °C (DC 2.5 A up
to 60 °C)
•
Relative humidity: 5% to 90% rH at 55 °C (131 °F), non-condensing
If this device is to be used in the Nordic countries, or in any environment where
the temperature range exceeds the product's operating temperature, it is the
responsibility of the integrators to ensure that the ambient environment is
controlled in such a way to ensure that the product operates within the specified
temperature range.
•
External Dimensions
•
Height: 67 mm (2.64 in)
•
Width: 97 mm (3.82 in)
•
Depth 102 mm (4.02 in)
Unit weight: 750 g (26.46 oz)
C
HAPTER
UX301 I G
NSTALLATION UIDE
3
25