VeriFone UX301 Installation Manual page 17

To connect the UX301
to a UX401 CTLS unit
NOTE
Connecting
Optional Devices
1
Attach one end of the RJ45 plug cable to the UX301 and the other end to the
UX401.
2
Attach one end of the SMA cable to the UX301 and the other end to the
UX401.
RJ-45
Figure 8 Connecting to a UX401 CTLS Unit
Tighten the SMA cable at both ends by holding the end cap and turning. Avoid
holding the strain relief cord while tightening or removing the end caps.
The UX301 can connect to various peripheral devices outside the UX-Series
product range.
Connecting to a TG-2460H Printer
Use the following cables to connect to the UX301 to a TG2460-H printer:
•
Y-cable (VPN CBL159-306-01-A)
•
TG2460-H printer power cable (VPN 28580-01-R)
•
RS-232 cable (VPN CBL013-005-01-A).
RJ-45
SMA
S
Cable Connections
UX401
SMA
UX301 I G
NSTALLATION UIDE
ETUP
17