S
ETUP
Installing or Replacing SAM Cards
To install or replace
SAM cards
NOTE
14
UX301 I
NSTALLATION
1
Disconnect the device from all power sources.
2
Disconnect the device from any external devices.
3
Carefully slide the SAM card into the slot, by aligning the card and carefully
sliding into the slot until fully inserted.
Figure 5
Installing SAM Card
The SAM card holders ensure that cards fit into the slots in only one way.
•
The rectangular symbols show the SAM card's notched corners are always visible.
•
These indicate which way the card notch should face before you insert the card into
the SAM slot.
The circular symbols indicate the SAM card slot numbers.
•
Figure 6
SAM Slots and Card Orientation
4
Install additional SAM cards in the available slots as necessary.
G
UIDE
SAM CARD 1 NOTCH FACES RIGHT
(GOLD CONTACTS FACE DOWN)
SAM CARD 2 NOTCH FACES RIGHT
(GOLD CONTACTS FACE DOWN)
SAM CARD 3 NOTCH FACES LEFT
(GOLD CONTACTS FACE UP)