VeriFone UX301 Installation Manual page 18

S
ETUP
Cable Connections
To connect to a
TG-2460H Printer
NOTE
Disconnecting
Cables
18
UX301 I
NSTALLATION
1
Disconnect the device from all power sources.
2
Connect the RS-232 cable to the UX301 printer port and connect the RJ45
plug to the printer.
Figure 9 Connecting TG-2460H Printer Cable
3
Connect power to the printer using the CBL159-306-01-A and 28580-01-R
cables.
Figure 10 Connecting Power to UX301 and Printer
Connecting the UX301 to the TG2460H printer requires 24 V DC power.
To disconnect cables, use the same steps described above in reverse. If
exchanging cables, use Verifone-approved cables. See
Documentation for cable part numbers and ordering information.
G
UIDE
TG2460H
TG2460H
Accessories and