Error Messages; Error And Confirmation Messages - Korg KROSS Operation Manual

Error messages

Error and confirmation messages

A
Aborted
Meaning: Execution of the function was cancelled.
Are you sure ?
Meaning: This message asks you to confirm execution. To
execute press the OK button. To cancel, press the CANCEL
button.
Audio recorder data error
Meaning: An error occurred while managing the audio song
recording data.
• No further recording is possible. Execute the Adjust
Audio Level function with "Level:00dB" on the recorded
data, and you'll switch to a new audio song so that you
can continue recording.
Audio song full
Meaning: Another audio song cannot be created because
there are already 200 audio songs.
• Switch to a different SD card.
Auto Power-Off is enabled.
The system will automatically shut down after being idle
for 30 minutes/1 hour/4 hours.
Meaning: The auto power-off function is enabled. If the
KROSS has not been played or operated for a specified
length of time, the power will turn off automatically.
• If you want to disable this function or change the time
setting, go to the GLOBAL> PREF page and set the
Auto Power-Off parameter. Use the Write Global Setting
function to save the setting.
C
Can't calibrate
Meaning: Calibration could not be performed correctly.
• Try again.
Can't update system
Meaning: Execution of the Update System Software
operation did not end successfully.
• Try the operation again.
Completed
Meaning: The processing executed by the command has
been completed.
Completed. Please turn the power off, and then on again.
Meaning: Execution of Update System Software has been
completed successfully. Turn the power switch off, and then
on again to complete the update.
Error messages Error and confirmation messages
D
Destination and source are identical
Meaning: When copying or bouncing, the same song, or
track was selected for both the source and destination. To
solve this problem:
• Select a different song, or track for the source and
destination.
Destination from-measure within the limits of source
Meaning: When executing the Move Measure command for
all tracks or within the same track, the specified destination
measure is within the source range. To solve this problem:
• Set a destination measure that is outside of the source
range.
Destination is empty
Meaning: When editing, the track that was specified as the
destination contains no musical data. To solve this problem:
• Select a track that contains musical data.
Destination measure is empty
Meaning: The measure that was specified as the destination
contains no data.
• Specify a destination measure that contains data.
Destination song is empty
Meaning: The song that was specified as the copy
destination or bounce destination does not exist.
• Execute the Create New Song command in the dialog
box that appears when a new song is selected before
copying or bouncing. (see page 56)
E
Effect size mismatch
Meaning: When copying or swapping effects, you
attempted to place a double-size effect at IFX5 (insert effect
5) or MFX2 (master effect 2).
• Don't specify a double-size effect for IFX5 or MFX2
when executing the command.
Effect type mismatch
Meaning: This message will appear when copying or
swapping effects if the copy-destination or swap-destination
IFX (insert effect), or MFX (master effect) has an effect that
cannot be selected.
• For each IFX, and MFX, some effects can be selected
and other effects cannot be selected. Verify that the
effect is one that can be selected for the copy-destination
or swap-destination IFX, or MFX.
Error in formatting media
Meaning: An error occurred while formatting the media.
• Use other media.
Error in reading from media
Meaning: An error occurred while reading data from media.
This error may also appear when data is being written to
media by a Save or Copy operation. To solve this problem:
• Execute the reading procedure once again. If the same
error occurs, it is possible that the data on the media has
been damaged.
115