ActionTec 54 Mbps Wireless Network Camera User Manual page 8

Connect the supplied power adapter here.
Power Input
MIC In If required, an external microphone can be attached here. Attaching
a microphone here will disable the built-in microphone on the front.
Microphones designed for use with computers are usually
compatible with this microphone input.
LAN port Use a standard LAN cable to connect your Camera to a
10/100BaseT hub or switch.
Note:
Attaching the LAN cable to the Camera disables the wireless
interface. Only one interface can be active at any time.
Reset Button This button has two functions:
•
•
Note: After this procedure is completed, the Ready LED will blink
three times to confirm that the reset was completed successfully.
Restore Default IP Address - When pressed and released, the
Camera's IP address will be automatically obtained from the
DHCP server.
Restore Default IP Address, Administrator ID, and
Administrator password - When pressed and held for three
seconds, the IP Address, Administrator ID, and Administrator
Password settings will be set to their default values.
•
IP Address: automatically obtained from the DHCP server
•
Administrator ID: administrator
•
Administrator Password: null (no password)
4