Wep Screen - ActionTec 54 Mbps Wireless Network Camera User Manual

WEP Screen

This screen is accessed by clicking Configure on the Network screen and selecting WEP from
the "Security System" menu. An example WEP screen is shown below.
Data - WEP Screen
WEP Encryption
WEP Encryption Select the option used on your wireless LAN.
•
•
•
Passphrase Generates a key from the phrase you enter, which may be easier than
entering keys in hexadecimal format (0~9 and A~F).
To use the Passphrase feature, enter the desired passphrase in the field
provided, then click Generate.
Default Key Select a key to be used as the default key.
If WEP encryption is used, you must enter at least one key value, the
Key Value
"Default Key." All transmissions are encrypted using the Default Key.
Other wireless stations must use the same key value in the same
position in their key table (it does not have to be selected as the default
key).
The other key values are optional, and are used only for decrypting
data. This allows you to use different keys for transmitting and
receiving, if required.
Figure 26: WEP Screen
None - This is the default. If selected, data is not encrypted before
being transmitted.
64 Bit Encryption - If selected, data is encrypted, using the
default key, before being transmitted.
You must enter a default key.
Other wireless stations must be set to use 64-bit encryption, and
have the same Key value in the same position in their key table.
128 Bit Encryption - If selected, data is encrypted, using the
default key, before being transmitted.
You must enter a default key.
Other wireless stations must be set to use 128-bit encryption, and
have the same Key value in the same position in their key table.
30