Chapter 4 Web-Based Management; Introduction; Connecting To The Camera; Connecting Using Your Web Browser - ActionTec 54 Mbps Wireless Network Camera User Manual

Chapter 4
Web-based Management
This chapter provides setup details of the Actiontec 54 Mbps Wireless
Network Camera's Web-based interface, and should be consulted by
experienced network administrators only.

Introduction

The Camera can be configured using your Web browser and must have an IP address
compatible with your computer.
To do this, use the supplied Wizard, as described in the previous chapter.

Connecting to the Camera

•
If you have run the Wizard, click Web UI in the Wizard's final screen to immediately
connect to the Camera using your Web browser.
•
If using only your Web browser, use the procedure below ("Connecting Using Your Web
Browser") to establish a connection from your computer to the Camera.
•
Once connected, you can add the Camera to your browser's "Favorites" or "Bookmarks."

Connecting Using Your Web Browser

1. Start your Web browser.
2. In the "Address" box, enter "http://" and the IP address of the Camera. In the example
below, the Camera's default IP address is used:
http://192.168.0.99
3. If the "Administrator ID" and "Password" have been assigned, you will then be prompted
for a username and password. Enter the name and password you assigned.
4
22