Adding Cameras On The Internet - ActionTec 54 Mbps Wireless Network Camera User Manual

Adding Cameras on the Internet

If the Camera you want to add is not on your LAN, but is available via the Internet, click
Internet. You will see a screen similar to the one below.
To add a camera to the "Camera List" on the Main screen:
1. Enter the "Camera Data" in the panel on the right. See below for details.
2. Click Test to check that a connection and login can be performed successfully.
3. Click Add. The Camera will now appear in the "Camera List" on the Main screen.
Camera Data - Internet
Device Name Displays the default name of the Camera, and cannot be changed.
This field will be displayed automatically once a connection to the
Camera has been established.
Displays the description entered by the Camera administrator.
Description
This field will be displayed automatically once a connection to the
Camera has been established.
Address Enter the domain name or IP address of the Camera.
Port Number Enter the port number used by the Camera. The Camera administrator
can advise which port to use. The default value is 1024.
Login The Camera administrator can require that users provide a username and
password before being allowed to view the live video.
•
•
You can add the same Camera twice, once for the LAN, and
again for the Internet. This will allow viewing the Camera
whether you are on the same LAN as the Camera or in a remote
location.
Figure 38: Add Camera from Internet
If the administrator has not enabled this option, the "Login" fields
can be left blank.
Otherwise, you must enter the username and password allocated to
your by the administrator.
45