Setup; Setup Procedure - ActionTec 54 Mbps Wireless Network Camera User Manual

Setup

Initial setup should be performed using the Setup Wizard. This program can locate the Camera
even if its IP address is invalid for your network. You can then configure the Camera with
appropriate TCP/IP settings for your LAN.
Subsequent administration can be performed with your Web browser, as explained in chapter
3, "Web-based Administration."

Setup Procedure

1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Setup.exe in the root folder.
•
You will see the Welcome screen shown below.
•
Click the Setup button to start the "Setup Wizard."
"
Figure 4: Welcome Screen
8