Live Recordings - ActionTec 54 Mbps Wireless Network Camera User Manual

Live Recordings

You can start and stop recording from the View screen, using the controls provided.
Controls are provided to stop and start viewing, and to start recording the video stream.
Play - Use this to re-start viewing (after clicking Stop).
Record. - Click to start recording the current video stream.
While recording, this button will be red. To stop recording, click the button
again.
Stop. - This will terminate the connection to the Camera, halting both the
viewing and the recording (if in progress).
Snapshot - Click to take a single JPEG snapshot image of the current video.
You can use "Preferences" to set the folder where these images are stored.
Audio. This can be used to select the audio stream. (Only one audio stream can
be selected at any time.) If the Camera does not support audio, or if audio is
disabled on the camera, this option is unavailable, and a red "X" will cover the
icon.
2X - Clicking this will set the viewing image to double size. The icon will then
change to the "1X" icon below.
1X - Clicking this will set the viewing image to standard size. The icon will then
change to the "2X" icon above.
Figure 42: Viewing Live Video
49