Video Settings - ActionTec 54 Mbps Wireless Network Camera User Manual

2. From the "Administration" menu, select Image. You will see a screen similar to the one
shown below.
3. Make the required adjustments, as explained below, and save your changes.

Video Settings

Resolution
Image Quality
Power Line
Frequency
Adjustment
Brightness
Red, Green, Blue
Default Button
Options
Time Stamp
Text Display
Audio
Figure 14: Image Screen
Select the desired video resolution. The default resolution is set to
320*240.
Select the desired image quality. The default "Image Quality" is set
to "Normal."
Note: Higher image quality requires more bandwidth.
Select the power line frequency (50Hz or 60Hz) used in your region,
to improve the picture quality under florescent lighting.
Select Automatic or Manual.
When set to the default setting, Automatic, the Camera adjusts the
brightness automatically based on the current environment.
If you want to adjust the brightness manually, select Manaul. You
can then enter the desired value.
Adjust these color settings to the preferred values. Note: When
Automatic is selected, this setting will not take effect.
Clicking this will set all the "Adjustment" fields to their default
values. You must click Apply to save these changes.
Enable the check box if you want the time to be displayed on the
video image.
If you want text to be displayed on the video image, enable this
feature by checking the check box. You can enter text up to 20
characters. This feature is often used to identify a Camera when
multiple Cameras are installed.
If you want audio to be included with the video, enable this option.
Some bandwidth will be allocated to the audio stream. In some
situations, this may affect the quality of the video.
15