Restore Atm Factory Defaults Menu; Figure 5-21. Restore Atm Factory Defaults Menu - ADTRAN Total Access 1248 Installation And Maintenance Practice

Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice

Restore ATM Factory Defaults Menu

Restore ATM Factory Defaults
Main Menu\ATM Circuit Management\Restore ATM Factory Defaults\
The Total Access 1248 provisioning system provides the ability to restore the ATM parameters
to the factory defaults.
TID: TA1248
Unacknowledged Alarms: None

Figure 5-21. Restore ATM Factory Defaults Menu

This action is service affecting. All traffic descriptors and PVCs are
removed.
The Restore ATM Factory Defaults menu options are shown in
5-36
Figure 5-21 displays the Restore ATM Factory Defaults menu.
Restore ATM Factory Defaults
WARNING! THIS IS SERVICE AFFECTING!
This is for defaulting the ATM parameters only. This
will delete all of the selected PVCs and reset the
traffic descriptors to their default values.
1. Delete All PVCs and Restore Default Settings
2. Delete Host PVCs
3. Delete Client 1 PVCs
4. Delete Client 2 PVCs
5. Delete Client 3 PVCs
Selection :
'?' - System Help Screen
CAUTION
Total Access 1248
Table
MM/DD/YY HH:MM
5-19.
61179641L4-5B