Snmp Community Names Menu; Figure 5-46. Snmp Community Names Menu - ADTRAN Total Access 1248 Installation And Maintenance Practice

SNMP Community Names Menu

SNMP Community Names
Main Menu\System Management\SNMP/TL1
The SNMP Community Names menu (see
accounts which specify unique IP addresses and privileges for network management. To
restrict SNMP remote access to a single IP Address, assign the IP Address to a community. An
IP Address of 0.0.0.0 allows access from all IP Addresses.
TID: TA1248
Unacknowledged Alarms: None
1. Name
4. Name
7. Name
The SNMP Community Names menu options are shown in
Table 5-46. SNMP Community Names Menu Options
Option Description
1 Name
2 IP Address
3 Privileges
4 Name
61179641L4-5B
Configuration\SNMP Community Names\
Total Access 1248
SNMP Community Names
Set Name to 0 to delete Community
private
2. IP Address 0.0.0.0
3. Privileges Read/Write
public
5. IP Address 0.0.0.0
6. Privileges Read
Not Configured
8. IP Address 0.0.0.0
9. Privileges
Selection :
'?' - System Help Screen

Figure 5-46. SNMP Community Names Menu

Figure 5-46) is used to establish up to three named
Table
Function
This option is used to configure the first SNMP
community. Settings include private and public.
This option is used to configure the first SNMP
community IP address in decimal dot format (i.e.,
###.###.###.###).
This option is used to configure the first SNMP
community privilege level. Options include Read/Write
and Read.
This option is used to configure the second SNMP
community. Settings include private and public.
Menu Descriptions
5-46.
5-73