Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice
Static IP Settings - for IP over ATM Menu
Static IP Settings - for IP over ATM
Main Menu\System Management\Mode Selection and Current IP
The Static IP Settings - for IP over ATM menu (see
all of the IP settings.
TID: TA1248
Unacknowledged Alarms: None
Figure 5-32. Static IP Settings - for IP over ATM Menu
The Static IP Settings - for IP over ATM menu options are shown in
5-54
Settings\Static IP Settings - for IP over ATM\
Figure
Total Access 1248
Static IP Settings - for IP over ATM
1. IP address
2. Subnet mask
3. VPI/VCI
4. PCR
5. Default Gateway
6. TFTP IP address
7. TL1 Port Number(set >1023) 13001
8. TL1 IP Transport type
9. Reset IP Factory Defaults
MAC Address
Encapsulation is via rfc1483 SNAP
Selection :
'?' - System Help Screen
5-32) is used to manually provision
192.168.1.1
255.255.255.0
0/32
3000
192.168.1.254
Not Configured
TCP
00-a0-c8-12-6d-f9
Table
5-32.
61179641L4-5B